一、 use：
This device is mainly used as vertical turbine rotors from the top, when the unit is turned on in a long time after shutdown, according to the provisions required from the top of the rotor to the thrust bearing oil film; sometimes also require jacking rotor overhaul, but also to other hydraulic equipment to provide high-pressure oil source.
Since the device uses castors structure, it can move freely between the units, so easy to use, flexible features.
The main technical parameters：
Working oil pressure: 16Mpa
Highest oil: 17.5Mpa
Oil volume: 13L / min
Motor type: Y112M-4 B5 Vertical
Motor power: 4.0KW
Oil storage tank capacity: 120L
Weight: 150Kg (without oil by weight)
二、 the structure and working principle：
The device consists of high-pressure pumps, safety valves, check valves, pressure was controller, drain valves, filters and other centrally installed in the fuel tank of the composition, structure and working principle as shown in the drawings.
三、 the installation and use instructions：
Starting for the first time need to exclude air in the system, should hit an open valve, to be excluded and then turn off the air; after the work is completed after the pump should also play an open valve, the system of deposit oil into the tank before closing.
When a user under the specified storage, transport and use, due to poor manufacturing and damaged or is not working from the date of shipment from the factory within two years, or product into operation within one year (the said period, whichever occurs first), , the company responsible for the repair or replacement.
Installation dimensions See attached：